Geyser Repair & Installation cost in Delhi NCR
| Service | Typical price |
|---|---|
| Inspection / visit | ₹300 – ₹500 |
| Heating element replacement | ₹700 – ₹1,500 (with part) |
| Thermostat replacement | ₹600 – ₹1,200 (with part) |
| Descaling service | ₹600 – ₹1,200 |
| New geyser installation | ₹500 – ₹900 (geyser extra) |
| Uninstallation | ₹300 – ₹500 |
Indicative prices in Delhi NCR for 2026. Parts vary by brand and capacity. You get a confirmed quote before any work starts.
What’s included
- Electrical and earthing check
- Diagnosis of element, thermostat and safety valve
- Leak and pressure-valve check
- Repair or replacement with your approval
- Test run before handover
Not included
- Replacement of corroded tanks (usually needs a new geyser)
- Concealed plumbing or tile-breaking work
How it works
- 1
Describe the problem
No heating, MCB tripping, leakage or noise — plus brand and capacity if known.
- 2
Confirm visit
We confirm the visit charge and time.
- 3
Diagnose and quote
The technician finds the fault and shares the repair cost before starting.
- 4
Repair and test
Parts are replaced and the geyser is tested for heating and safety.
Signs your geyser needs attention
- Water takes much longer to heat
- MCB or RCCB trips when the geyser is switched on
- Rumbling or popping sounds while heating
- Rusty or muddy hot water
- Water leaking from the bottom or the valve
Tips for flats and housing societies
- Hard water across much of Noida and Ghaziabad causes scale to build on heating elements — descaling every 1–2 years extends geyser life and cuts electricity use.
- Always ensure the geyser is properly earthed and on a circuit with an RCCB/ELCB. Never use a geyser with a damaged plug or exposed wiring.
- Book geyser servicing in October, before the winter rush.
How to prepare
- Switch off the geyser and let the water cool before the technician arrives.
- Clear access to the geyser and its switch.
Frequently asked questions
Why is my geyser not heating?
The most common causes are a failed heating element, a faulty thermostat, or a tripped safety cut-out. A technician can diagnose it in one visit.
How much does geyser repair cost?
A visit typically costs ₹300–₹500, with element or thermostat replacement around ₹600–₹1,500 including parts in Delhi NCR.
Why does my geyser trip the MCB?
Often a shorted heating element or wiring fault. Switch it off and get it checked — do not keep resetting the MCB.
How long does a geyser last?
Usually 7–10 years with regular descaling, less in very hard water areas.
Repair or replace?
If the tank is leaking or corroded, replacement is usually better. Element and thermostat faults are worth repairing.